Description
Specifications:
Brand: HANGKAI
Displacement: 169CC
Gear ratio: 2.08(27:13)
Cylinder: 2
Max.Output(kw): 8.8
Max.speed(r/min): 4500-5500
Gear Positions: F-N-R
Packing size: 120×70.5×37.5cm
Ignition System: CDI
Cooling System: Water-cooling
Control System: Tiller control
Starting System: Manual start
Control System: 93 gasoline
N.W./G.W.(kgs): 27/31
Bore x Stroke(mm): 50×43
Recommended Propeller range: 3 -91/4”x8
Recommended Lubricant: 2 Stroke Lubricating oil
Mixing ratio: Fuel:oil=50:1
Trim and tilt system: Manual Tilt
Overall LxWxH(cm): 78.3×33.2×104
Standard fuel tank capacity: 24L
Please Must Read before using
Firstly, Fill the gear oil (open gear box lid and fill it)
Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times
Thirdly, Fill engine oil don’t exceed the head of the pattern
Forthly, turn the throttle to the start up and turn the accelerator gets up to 50percent
Then, Rapidly pull the starter line
After the motor start, please turn the throttle to running state
Then, it can be operated now
Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor
Don’t do the following will avoid cylinder Scoring
1. Start the motor in the water
2. Use the motor when it stop cyling water
Even if you want test the motor, it should be done in the river
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked
